REMOTE Services Methodology 1 ARCHITECTURAL REFERENCE PARAMETERS IN INTELLIGENT AMBIENTS This section proposes several types of architectures inside the software engineering that can be combined in order to get a final complete architecture for the Intelligent Ambient proposed, complying with all the REMOTE Project requirements. It is intended to provide a short explanation of the […]
INTRODUCTION For many years, proprietary software has been the dominating business approach used by the commercial software firms. Industry giants like Microsoft proved this strategy to be successful, building their multibillion dollar empires based on the proprietary software platform. Over the past decade, a new business approach called open source model which involves contributors from […]
Studydriver writers will make clear, mistake-free work for you!
Get help with your assigmentDistributed computing system ABSTRACT Distributed System: A distributed system (DS) is a collection of autonomous computing sites that neither share a common memory nor a global clock, nor communicate solely by exchanging messages. Mutual Exclusion: When processes interact through shared resources (Critical Section), the integrity of the resources may be violated if the accesses are […]
Bluetooth Remote access to pc using mobile devices CHAPTER 1 INTRODUCTION TO RESEARCH 1.1INTRODUCTION: Bluetooth is a wireless technology of the last decade, there has been a lot of research going on this technology all over the world. The Bluetooth was named after the 10th century Danish King Harald Blatand or Harold Bluetooth. King Blatand […]
Abstract An Embedded system has become indispensable in our lifes: cars, aeroplanes, powerplant control systems, telecommunications systems, all contain digital computing systems with dedicated functionality. Most of them are real-time systems which response to their timeliness constraints. The timeliness requirement has to meet under influence of unpredictable stochastic behavior of the system. In this thesis […]
SNMP Abstract: SNMP or Simple Network Management Protocol (SNMP) is an application layer protocol that provides the exchange of management information between network devices. SNMP is a part of the Transmission Control Protocol/Internet Protocol (TCP/IP) protocol suite. Through this research the emergency of network management will be managed for fire alarm, power off. Managing devices […]
Developing software Chapter 1 Aim The aim of this project is analyzing the IT requirement and developing software for a small pharmaceutical wholesaler working in India. Abstract The purpose of this project is to investigate different approaches to developing software for a wholesale business in the pharmaceutical sector. Apart from billing, maintenance of stock, placing […]
Chapter 2 Literature review About Java:- Initially java language is named as “Oak” in 1991, which is designed for the consumer electronic appliances. Later in 1995 the name was changed to Java. Java was developed by James Gosling, a development leader in sun micro system. Oak was redesigned in 1995 and changed the name to […]
Chapter 1: Introduction The improvement in capabilities of computation of processors, capacities of memories and advance engineering techniques are facilitating a new generation of low cost sensor and actuator nodes. Sensors include but not limited to seismic, radio wave frequency, temperature and humidity, electric and magnetic, infrared, and location and navigation sensors. A networked sensor […]
Introduction I am the student of International Advanced Diploma in Computer Studies (IADCS). In this course, I have to do Compute Forensic assignment. The assignment title is “Didsbury Mobile Entertainments LTD”. This assignment helps me understanding computer forensics investigation and techniques Before this assignment, although I am interested in computer forensic, I am hardly used […]
ENCODEDECODE DEMO ——————– /* * encodedecode.h * * ============================================================================ * Copyright (c) Texas Instruments Inc 2005 * * Use of this software is controlled by the terms and conditions found in the * license agreement under which this software has been supplied or provided. * ============================================================================ */ #ifndef _ENCODEDECODE_H #define _ENCODEDECODE_H /* Standard Linux headers […]
Introduction 1.1 Purpose of the System The main aim of is HUMAN RESOURCE MANAGEMENT SYSTEM is automating the resume processing for organization that is applied by the candidates. With this project organization can add the resume to the database and track the resumed to various rounds and it provides reports on jobs. The objective is […]
Abstract Mobile Ad Hoc Network (MANET) is a wireless network capable of autonomous operation. MANET routing has no fixed base station and hence nodes in the network are mobile and self configuring. A MANET is characterized by multi hop routing so that nodes are not connected to layer 2 but can communicate through layer 3 […]
Abstract. Object-oriented frameworks offer reuse at a high design level promising several benefits to the development of complex systems. This paper sought to 1) define the concepts of object oriented techniques in addition with the OO issues, development techniques and concepts of object oriented programming, it is also introduced the UML as an ordinary and […]
INTRODUCTION 1.0 INTRODUCTION Private branch exchange system (PBXs) operates as a connection within private organizations usually a business. Because they incorporate telephones, the general term “extension” is used to refer to any end point on the branch. The PBX handles calls between these extensions. The primary advantage of PBXs was cost savings on internal phone […]
ACKNOWLEDGEMENTS: The interest in the field of networking, driven me to take the computer networking as my course in M.Sc. there are many different types of networks. Out of them the more popularized and upcoming trend of networks are peer-to-peer networks. This report of my final dissertation for the partial fulfilment of my M.Sc, computer […]
Computational Grids combine heterogeneous, distributed resources across geographical and organisational boundaries. Grids may be formed to provide computational power for CPU-intensive simulation, high throughput computing for analysing many small tasks or for data intensive tasks such as those required by the LHC Experiments. For all of these situations the challenges are the same: how to […]
Overview The FHS is maintained by the Free Standards Group, now The Linux Foundation, a non-profit organization consisting of major software and hardware vendors, such as HP, Red Hat, IBM and Dell. However, the vast majority (as of 2009) of the Linux distributions, including those developed by members of the Free Standards Group, do not […]
Q1. Design specification of an assembler with diagram? Ans. Typically a modern assembler creates object code by translating assembly instruction mnemonics into opcodes, and by resolving symbolic names for memory locations and other entities. The use of symbolic references is a key feature of assemblers, saving tedious calculations and manual address updates after program modifications. […]
Chapter 1: Introduction Background and Motivation With the world shrinking to become one global village, with the leading MNCs of the world exalting the need for Virtual Teams and with heavy emphasis on dividing a problem into sub-problems, each to be handled in parallel, Real-time Collaboration has become simply inevitable. As such, there is a […]
H.264 video streaming system on Embedded platform ABSTRACT The adoption of technological products like digital television and video conferencing has made video streaming an active research area. This report presents the integration of a video streamer module into a baseline H.264/AVC encoder running a TMSDM6446EVM embedded platform. The main objective of this project is to […]
1.) Introduction A distributed computing system can be defined as a collection of processors interconnected by a communication network such that each processor has its own local memory. The communication between any two or more processors of the system takes place by passing information over the communication network. It has its application in various fields […]
INTRODUCTION My name is Zaw min Tun and I am a student of International Advance Diploma in Computer Study (IADCS) of NCC and attending at KMD Computer Centre which is situated in Yangon, Myanmar. In the first term of IADCS, I have to study “Advanced JAVA”, “System analysis and Design” and “Enterprise Network”. All of […]
Wireless sensor networks Mitigating performance degradation in congested wireless sensor networks CHAPTER 1: WIRELESS SENSOR NETWORKS 1.1 Introduction: Wireless sensor networks (WSNs)[1] have attracted tremendous attention in both academia and industry in recent years. A WSN consists of one or more sinks and perhaps tens or thousands of sensor nodes scattered in an area. The […]
Chapter 1 Introduction to Home Automation HOME AUTOMATION What is automation? When you have automatic control on different things and functions atYour home then we can say that you have home automation .This automation can be via aRemote or wired .simply things can be control according to your wish in history differentMethod and techniques are […]
Executive Summary Introduction/Background Traditionally development of microprocessor based control systems involved the following steps. The control algorithm was designed by a systems or a control engineer. The algorithm would then be coded in programming languages like assembly, C or C++ which would be implemented on a microprocessor based hardware – the controller. The problem with […]
CHAPTER 1 1. INTRODUCTION The VLSI was an important pioneer in the electronic design automation industry. The “lambda-based” design style which was advocated by carver mead and Lynn Conway offered a refined packages of tools.. VLSI became the early hawker of standard cell (cell-based technology). Rapid advancement in VLSI technology has lead to a new […]
Introduction Electronics is the art and science of getting electrons to move in the way we want to do useful work. An electron is a sub-atomic particle that carries a charge of energy. Each electron is so small that it can carry only a tiny bit of energy. The charge of electrons is measured in […]
Chapter 1:Introduction Library management system includes areas such as issuing and returning of books, classification of materials, and student’s console using various techniques. The two main features of this system include theft detection of unissued books and automatic system for issuing and returning of books for its members. The theft detection model that we have […]
1.0 Introduction In Malaysia, each house using electricity at Tenaga Nasional Berhad (TNB). With the use of electricity, the family in each house to do the activities and generate electrical appliances such as air conditioners, refrigerators, washing machines and others. Basically when using a lot of electricity, home users should pay a lot of bills. […]
